Read selection, custom order and wear diagnosis FAQs
Jaw Crusher Cheek Plate
Drawing-specified wear-resistant alloy; confirm grade and impact duty
Casting and material-specific heat treatment; machining and inspection per approved drawing and technical agreement
Verify machine duty, loads and installation conditions; feed suitability depends on the complete machine
jaw crusher
Supports custom manufacturing from CAD/PDF drawings, physical samples, or on-site mapping
Jaw Crusher Cheek Plate for jaw crusher. Location and function: At the sides of the crushing chamber; protects the frame side walls. Material selection: Drawing-specified wear-resistant alloy; confirm grade and impact duty. Manufacturing and acceptance: Casting and material-specific heat treatment; machining and inspection per approved drawing and technical agreement. Inspect for local wear-through, cracks and loose fastening. For fit verification and a quotation, provide upper/lower position, outline, hole spacing, thickness and machine model. Final material, dimensions and acceptance criteria follow the approved drawing and technical agreement. Service life depends on actual operating conditions and operating records.
Confirm machine model, part number, installation position and dimensions together.
Select grade and heat treatment for the part function, loads and duty.
Agree dimensions, chemistry, hardness and applicable NDT by material and geometry.
Actual service life depends on operating conditions and records. Follow the machine maintenance procedure.
| Item | Selection and acceptance |
|---|---|
| Equipment | jaw crusher |
| Location and function | At the sides of the crushing chamber; protects the frame side walls |
| Failure modes | local wear-through, cracks and loose fastening |
| Quotation inputs | upper/lower position, outline, hole spacing, thickness and machine model |
| Inspection | Agree chemical analysis, dimensions, hardness, microstructure and applicable NDT according to material and geometry. No single NDT method applies to every part. |