Product Details

The rolling mortar wall is an important part of the cone crusher. It forms the cone crusher together with the frame, the horizontal shaft, the moving cone, the balance wheel, the eccentric sleeve, the lower crushing wall, the hydraulic coupling, the lubrication system, the hydraulic system, and the control system. . Also called: crushing wall, fixed cone liner, cone crusher liner, cone crusher liner, static cone, fixed cone, crushing plate.

The rolling mortar wall and the crushing wall are the main components that work together in the cone crusher to crush the material. Because it is fixed, it is also called the fixed cone. When the cone crusher is in operation, the crushing wall will move in a trajectory, and the distance from the wall of the rolling mortar will be close and sometimes far away. When the crushed material is squeezed, part of the material will be discharged from the open side discharge port. The wall of the rolling mortar has a U-shaped screw on the adjusting ring. Zinc alloy is injected between the two to make it tightly integrated. When the wall of the rolling mortar is newly installed or replaced, the tightening condition should be checked after 6 to 8 hours of work. And tighten the U-shaped screw again.

In the working process of the cone crusher, the motor drives the eccentric sleeve to rotate through the transmission device, and the moving cone rotates and swings under the forced movement of the eccentric shaft sleeve. The section of the moving cone near the static cone becomes the crushing cavity, and the material is affected by the moving cone and The static cone is broken by multiple squeezing and impacts. When the moving cone leaves this section, the material that has been crushed to the required particle size there falls under its own gravity and is discharged from the bottom of the cone. The materials to be crushed are loaded from the inlet of the cone crusher.

Features of accessories

1. The new composite rolling mortar wall and broken wall are cast from new composite materials, with a long service life, which is three times that of the ordinary rolling mortar wall;

2. Strong wear resistance, the new composite rolling mortar wall and crushing wall can adapt to the production environment with extremely harsh industrial and mining conditions, strong abrasiveness, and high production intensity. It is suitable for crushing hard and strong abrasive materials;

3. High cost performance. The use of new composite rolling mortar wall and broken wall can reduce the investment cost of casting wear by more than half;

4. Wide application fields, the new composite rolling mortar wall and crushing wall are widely used in crushing iron ore, non-ferrous metal ore, granite, quartzite, pebbles, etc. 
与此原文有关的更多信息要查看其他翻译信息，您必须输入相应原文